14″ Multi-parameter Patient Monitor with touch screen, TEMP, SpO2, NIBP, 5-lead ECG
Multi-parameter Patient Monitor 14 Touch is portable and can be used in hospital ICUs and CCUs, operating rooms, clinics, and for in-home patients.
This is the ideal monitor when patient transport is required, either within your facility or by ambulance. High cost performance ratio that provides healthcare teams adequate and accurate information they need at the patient’s bedside.
Wide screen at 14” with high resolution display. A built in long life lithium battery for convenient patient transfer and emergency power backup.
Order now for a FREE delivery!
| Display 14" colour TFT screen | |
|---|---|
| Alarm Three Level | Low, medium and high |
| Indication | Auditory and visual |
| Setup | Default and custom |
| Silence | All alarms can be silenced |
| Volume | 45-85 dB @ 1 meter |
| Pulse Rate Measure/alarm range | 20 ~ 300bpm |
| Resolution | 1bpm |
| Accuracy | ± 3bpm |
| SpO2 Measurement range | 0 ~ 100% (resolution: 1%) |
| Accuracy | 70% ~ 100% ± 2% (40% ~ 69% ± 3%) |
| NIBP Method | Oscillometry |
| Measure mode | Manual, Auto, STAT |
| Measure interval in auto mode: | |
| 1~5/10/15/30/60/90/120/180/240/480min | |
| Measure period in STAT mode | 5min |
| Pulse rate range | 40 ~ 240bpmMeasure & alarm range: Adult |
| SYS 40 ~ 280mmHg | |
| DIA 10 ~ 220mmHg | |
| MEAN 20 ~ 240mmHg | |
| Measure & alarm range | Paediatric |
| SYS 40 ~ 220mmHg | |
| DIA 10 ~ 160mmHg | |
| MEAN 20 ~ 170mmHg | |
| Measure & alarm range | Neonatal |
| SYS 40 ~ 135mmHg | |
| DIA 10 ~ 100mmHg | |
| MEAN 20 ~ 110mmHg | |
| Static pressure measurement | |
| Range | 0 ~ 300mmHg |
| Accuracy | ± 3mmHg |
| Resolution | 1mmHg Accuracy: |
| Max. Mean Error | ± 5mmHg |
| Max. Standard Deviation | 8mmHg |
| Overpressure protection: | |
| Adult 300mmHg | |
| Paediatric 240mmHg | |
| Neonatal 150mmHg | |
| ECG 5 Leads | RA, LA, LL, RL, V |
| Lead mode | I,II, III, AVR, AVL, AVF, V |
| Gain | × 1.25mm/mV,2.5mm/mV, |
| 5.0mm/mV, 10mm/mV, | |
| 20mm/mV | error ≤ 5% |
| Sweep speed | 6.25mm/s,12.5mm/s,25mm/s, |
| 50mm/s | error ≤ ± 10% |
| Bandwidth | Surgery 1 ~ 25 Hz |
| Monitor 0.5 ~ 40 Hz | |
| Diagnostic 0.05 ~ 130 Hz | |
| Sensitivity | >200 μ V P-P |
| CMRR | ≥ 112dB |
| Differential Input Impedance | >5M |
| ohm Electrode Offset Potential | ±300mV |
| Polarization Voltage | ≥ ± 500mV |
| Input Impedance | ≥ 5 M |
| Calibration Voltage | 1mV ± 5% |
| Temp 2 channel | |
| Measure & alarm range | 0 ~ 50 C° |
| Resolution | 0.1 C° |
| Accuracy (no sensor) | ±0.1 C° (0~50 C°) |
| Data storage Trend diagram/table | 720h |
| NIBP review | 10000 events |
| Wave review | 12h |
| Alarm review | 200 alarm events |
| Support drug concentration titration analysis | |
| Weight 4.1 kg | |
| Power AC | 230V, 50Hz |
| DC | Built-in rechargeable battery |
| Battery | 11.1V 24wh Li-ion battery (2+ hours on full charge, 5 min low battery alarm) |
| What is included | |
| 14″ Patient Monitor with Touch Screen | |
| Power cable | |
| Ground cable | |
| User's Manual | |
| SpO2 sensor | |
| Blood pressure cuff (NIBP), adult size | |
| NIBP connection tubbing | |
| ECG cable | |
| Temperature probe | for Temperature |
- Choosing a selection results in a full page refresh.
